| Home >> solar water heater |
|
| Creates the splendor long hot cabin solar-powered water heater through a body machine compartment combination technology, realizes
the multi-cabins using the hot water honeycomb duct layer upon layer to take the hot water, are more than 30% hot water quantity the ordinary solar-powered water heater. At the same time, it may also
through increase the cabin body to realize the capacity to promote, increased the resources sustainable use greatly, and installs is facile, but the old generation product is unable to realize these
functions. creates the splendor long hot cabin solar-powered water heater only in the water leakage end one to two cabin disposition electricity auxiliary heater, does not look like a cabin type
electricity auxiliary heating the university, time-saving, the province electricity effect. creates the splendor long hot cabin solar-powered water heater to originate the machinery from to make up
the technology, has shielded the solenoid valve, the water level sensor two primary devices, reduced the breakdown service rate greatly, simultaneously realized the power cut to use as usual, avoids
the old generation water heater because of exploding the tube phenomenon which cut power causes. |
|
LinAn Euro-China Co., Ltd.
|
|
| All our solar water heater products: |
| 1. Solar Energy Vacuum Tubular Water Heater |
|
Product class: Vacuum tube
inner tank material: SS304_2B food grade
solar water heaterglass tube length: 58x1800mm /47x1500mm
out tank material: Aluminum alloy with metal coating / stainless steel Dia.460mm/ 420mm/ 470mm outer tank.
frame material:imported hot galvanized steel folded sheet with powder painting / stainless steel;
insulation: 50mm polyurethane total forming with pressure and best density of 40kg/m3
Available sizes:16,18,20,24,30.... |
 |
Release Date: July 28, 2009
|
|
|
| 2. Aluminizing Zinc Plate Type Solar Water Heaters |
Product class: Aluminizing Zinc
Product Introduction: Aluminizing Zinc Plate Solar Water Heater System: 1.Material of Inner tank : SUS304-2B
stainless steel with 0.4mm thickness 2.Material of Outer tank : Aluminizing zinc plate with 0.31mm thickness 3. Magnetic-controlled Al-N-Al splash all glass evacuated heat-collecting tubes, fast heat
absorbing and temperature risen 4. Heat Preservation Layer : 55mm polyurethane integral foaming, superior heat preservation 5. Material of support : Zinc-plated with plastic spray coating treatment
(Anti-ultraviolet)with 1.2mm thickness ...... |
 |
|
Release Date: July 28, 2009 |
|
|
| 3. Compact Pressurized Solar Water Heater |
|
Product class: Compact Pressurized
Product Introduction: 1.Sectional metal heat-pipe vacuum tube ( size : Ø 58mm*1800mm ); No water in vacuum>
tube, no water dirty, prevent freezing. 2. "Stainless steel or porcelain inner tank" : working Pressure: <= 0.6Mpa
( the steel plate and macromolecule material connection very well ) 3 .Insulation : polyurethane integral foaming with 55mm thickness 4.Material of outer tank : aluminizing zinc plate or stainless
steel with 0.35mm thickness compact pressure solar water heater ....... |
 |
|
Release Date: July 28, 2009 |
|
|
| 4. Solar Heat Pump Water Heater / Solar & Air-Source Water Heater |
Product class: Air-source
1) Hybrid advantages of solar water heater and air source water heater. In sunny days, the water is heated by solar energy, while in cloudy or rainy days, the water is heated by air energy
2) Safe, high efficiency, energy-saving and environment protection
3) Intelligent control and automatic operation
4) Convenient installation: available on both horizontal and slanting house roofs
5) ISO9001 / CCC / CE certificate |
 |
|
Release Date: July 28, 2009 |
|
|
| 5. Complete non-pressurized solar water heater |
|
Product class: Non-pressurized
Material Inner tank: quality stainless steel( SUS304-2B )
Outer tank: galvanize steel Frame and bracket:galvanize steel Thickness Inner tank: 0.4mm Outer tank: 0.4mm
Frame and bracket:1.5mm Insulation layer: over 55mm Angle 15°,25°,30°,40°,45°etc. Angle can be designed
according to clients'requirement Use range 2 ~ 8 persons
MOQ 20ft container; for trial order, small quantity is available; sample is available
Lead time within 15 days for full container, 7 days for samples |
 |
|
Release Date: July 28, 2009 |
|
|
| |
|
|
|